glass cloth
英 [ɡlɑːs klɒθ]
美 [ɡlæs klɔːθ]
网络 玻璃布胶带; 玻璃布; 玻璃纤维布; 玻璃纖維布; 玻璃纤维织物
双语例句
- The properties and preparation of a tooling composite material of bismaleimide resin modified with glass cloth and carbon cloth were introduced in this paper.
本文介绍了一种以改性双马来酰亚胺树脂为基体，高强度玻璃布和碳布增强的模具用先进复合材料的制备和性能。 - The glass cloth on surface not only could reduce impact damage, but also could show the damage within the plane on the surface so that it could been found easily.
表面玻璃布不仅能减少冲击损伤，而且能使板内的损伤显露在表面，容易让人发现。 - The utility model relates to an epoxy paper glass cloth double-faced copper-clad plate, which is applied to the basic materials of different electronic devices, instruments and circuit boards.
本实用新型涉及一种环氧纸玻璃布双面覆铜板，用于各种电子设置、仪器仪表、电路板的基础材料。 - Melamin alkyl varnish coated glass cloth
三聚氰胺烷基漆玻璃布 - Preparation and properties of toughened bismaleimide matrix resins and glass cloth reinforced laminates;
压制得到的玻璃布层压板具有良好的力学性能和电气性能。 - A new glass cloth laminate applied in embedded capacitor are prepared with the composite resin.
并将其应用于制备内嵌式电容器用玻璃布复合层压板。 - The glass cloth subequipment porter carry the frame which is used to place glass cloth reel from placing position into hauling-away work position.
玻布用搬运子母车是将放置玻布卷的玻布架从布置场运入运出工作位，整个设计包含机械结构部分设计和控制部分设计。 - A systematic experimental study was conducted to define the influence of many factors, including PTFE content, processing pressure, processing temperature and environmental humidity, on the dielectric properties of high silica glass cloth reinforced PTFE composite.
对高硅氧玻璃纤维布增强聚四氟乙烯（PTFE）复合材料的含胶量、成型压力、烧结温度及环境湿度等多种因素对其介电性能的影响进行了较为系统的实验研究。 - Inner Tension Distribution of Taper Rolling-up and Parameter Determination in Glass Cloth Dipping Process
玻璃布浸渍加工锥度收卷中的内张力分布及其参数确定 - Study on Low Temperature Mechanical Properties of Silicone Vulcanizate and Its Glass Cloth Composite
硅橡胶及其玻璃布复合体低温力学性能的研究 - The results showed that about 11% ( weight fabrication) chopped fiber or 37% glass cloth reinforcing PTFE had the highest tensile strength and acceptable dielectric properties.
结果表明：11%短玻纤和37%玻纤布（重量百分含量）增强PTFE具有最高的拉伸强度和良好的介电性能。 - The Study of the Formulation of Adhesive Used for FR-4 Glass Cloth Laminate
FR-4层压板用胶粘剂配方的研究 - The glass cloth prepreg and laminates based on this matrix resin were prepared.
考察了共聚树脂及玻璃布预浸料的贮存稳定性和层压板的性能。 - It's usual for a printed dipole to be encapsulated in polyurethane foam then use epoxy adhesive to glue glass cloth on the surface of polyurethane foam. This method has advantages of light weight, high strength, easy manufacturing and low cost.
聚氨脂泡沫发泡成型，外表用环氧胶粘贴玻璃布是印刷振子天线常用的包封方法，具有重量轻、强度高、制造方便、成本低的优点。 - Study on PPO/ epoxy glass cloth copper clad laminate
聚苯醚/环氧玻璃布覆铜板的研制 - This paper introduces the theories of the winding tension control system in glass cloth dipping process and discusses the changing pattern of the inner tension and the factors that influence the tension from the theory of elasticity.
介绍了玻璃布浸渍加工中收卷张力控制系统的工作原理，并从弹性理论出发，讨论了收卷过程中的内张力变化规律及其影响因素。 - The glass fiber reinforced plastics have been prepared with bisphenol A unsaturated polyester and gel coating resin as the matrix resins, glass fiber mat and glass cloth as the reinforcing materials.
以双酚A型不饱和聚酯、胶衣树脂为基体树脂，玻璃纤维表面毡、玻璃布、短玻璃纤维毡为增强材料，制备了玻璃纤维增强塑料（GFRP）填料塔。 - This paper introduces a new type epoxy glass cloth reinforced mica paper tape of high thermal conductivity about 0.4W/ m · K. The main materials, preparation process for increasing thermal conductivity and usage of the tape were researched.
本文介绍了导热系数大于0.4W/m·K的新型高导热环氧玻璃粉云母带的研制和提高导热系数的途径。 - The formulation and technology of 3240 laminated glass cloth made of epoxy/ phenolic resin emulsion are introduced.
介绍环氧/酚醛树脂乳液制造3240玻璃布层压板的配方和工艺。 - A new glass cloth laminate was prepared by using benzoxazine as liquid cement, alkali-free glass cloth as backing material, and treating with cement dipping, baking and pressing.
并以苯并恶嗪预聚体为胶液、无碱玻璃布为基材，经浸胶、烘焙、压制制得一种玻璃布层压板。 - The formation of silicone rubber/ glass cloth composite during vulcanization featured simple process and stable adhesion.
硅橡胶在硫化成型时实现与玻璃布的复合，具有工艺简单、粘合性能稳定等优点。 - A Study on Dynamic Mechanical Properties of Glass Cloth/ Epoxy Laminates at Different Temperatures
玻璃布-环氧层板动态力学性能和温度相关性的研究 - On Molding Process and Properties of BMI/ Glass Cloth Composite
双马来酰亚胺（BMI）&玻璃布复合材料成型工艺及性能研究 - The down-slipping, crumpling and oil leakage has been solved in the winding of FRP taper case with impregnated glass cloth by using cellulose acetate reinforced by window screening ( glass fiber) as mould release agent.
采用玻璃窗纱增强醋酸纤维素作脱模剂，解决了浸胶玻璃布缠绕FRP锥壳时下滑、折绉和渗油问题。 - Glass cloth laminates based on these resins were prepared and showed very good mechanical and electrical properties, and can be used as heat-resistant structural or electrical insulating materials at 180-200 ℃.
以该树脂为基体制备了玻璃布层压板，测试结果表明层压板具有较好的力学性能和电气性能可以作为耐高温结构材料或电绝缘材料在180～200℃长期使用。 - SEM pictures of the laminate were revealed the resin matrix was connected to interfaces between the glass cloth better.
层压板的SEM电镜图显示，树脂基体与玻璃布之间的界面粘结良好。 - Furthermore, glass cloth ( GF) reinforced laminates based on the cured BZ/ BMI blends were prepared and their mechanical properties, morphological were investigated.
进一步，制备了玻璃布增强的BZ/BMI层压板，并对其力学性能和断面形貌进行了系统研究。 - Thus it can be seen that use modified epoxy resin as matrix resin and glass cloth as a reinforcing material, composite materials with excellent comprehensive properties can be obtained.
可见，以CIBAPP改性环氧树脂作为基体树脂，以玻璃布作为增强材料，可制得综合性能优异的复合材料。